Category Archives: Rent Heavy Equipment

Tips on how to run a water truck/water wagon

Driving any kind of heavy equipment needs good amount of carefulness. One needs to be highly experienced in operating heavy equipment if he wants to do it in the best possible way. Be it a dozer or an excavator or just a water truck, it requires high competency on the part of the driver in order to make sure that he is doing his job the right way. One has to be extremely careful in analyzing the situation on ground and need to wear all the safety accessories to ensure that he does not hurt himself or the people around the machine. If we talk about a water truck, it is used primarily in construction and mining sites to control dust. It is not so difficult to operate a water truck as it could be for operating any other type of heavy equipment but the operator has to be extra cautious while he is on it.

A water truck can also be used in case of fire. One can use the spray nozzles to spray water and extinguish the fire. So when the driver is in the process of such perilous tasks, he needs to be very careful about his safety and the people who are on the truck assisting to put off the fire. We would be discussing in brief how can should operate a water truck.

Make proper use of gears and steering:-

A water truck is almost same like any other truck used for transportation purpose. It has similar features as what is available in a normal truck. It is just that the water truck contains water inside it and it needs a spray nozzle to spray out the water. What is rather important to note is that the operator should make good use of the gears and should steer the truck correctly. The truck will not be moving at a high speed while it is pumping water out. So it has to maintain a constant speed keeping the gears consistent and got to pay heed to the steering that helps to keep the wheels in the right direction.

Do not speed up the truck unless it is absolutely necessary:-

While you are settling the dust in a construction or a mining site, you just can’t increase the speed of the truck. You have to keep a considerable pace and must ensure that you do not move fast or else the one who is spraying the water will have a hard time to cover the entire area. Other than this, if you are working on a rugged terrain, it will be just not possible for you to drive the truck at a high speed. You have to maintain the speed and keep it to a point from where you do not lose its control. Anything short of it will have serious repercussions.

Go through the user manual if you are new to it:-

A user manual is always helpful in situations where you will be driving a brand new truck. Any new truck will give you some kind of comfort issues which can be tackled by going through the user manual.

 

Related articles across the web

RENTAL SERVICES LEASING TRACK LOADERS

Track loaders are heavy motorized equipment more like vehicles for engineering purposes. These vehicles or equipment are motorized and are made to function in ways where they are used to dig or load material. Materials can include stones, mud, construction material and other various objects. Track loaders form a very important part of the fleet of vehicles that help in construction and other excavation purposes.

Track loaders are modern equipment created to save manual energy and help construction workers to perform the required work at a faster pace as well as save quality time. It reduces the manual labor in turn saving up on manpower and the cost. Track loaders have bucket fork like structures attached to the front of it which helps in digging, lifting and excavating a particular area or substance with perfection. Since it is a heavy construction equipment, it has a huge structure that lifts objects in a large quantity and having the work done faster.

Track loaders being a vehicle which multitasks, is not automated. It requires a controller who needs to provide instructions in the form of electro-hydraulic controls which is efficient and performs the tasks with ease. Track loaders are usually used during construction to dig soil and make space for concrete fillings. They are also used for excavation purposes to remove dumped material such as soil, stones, bricks etc. It takes up a huge quantity at once to transfer it to its desired place which saves up on a lot of time.

An excavator or a bulldozer can only perform tasks of excavating and destroying objects respectively but a track loader is a vehicle that multi tasks and can perform both these actions with ease. Modern track loaders are built according to the requirements or the users. Demands like soundless engines, fast working electro-hydraulic controls that are easy to handle, best visibility from the control area is what the manufacturers receive.

These demands are easily met with the help of modern technology and robotic controls. These heavy weight vehicles are an asset to any organization owning it. It requires good care and maintenance in order to expect good results from the track loaders. Owning them requires a good investment and organizations who solely deal with construction, excavation, digging etc. are in need of them all the time. Maintaining them and servicing these heavy duty vehicles on time helps to get best results out of them.

There are several agencies who lease out these equipment as rentals as few may not require them at all times and therefore need it only at times when there is a particular task to be performed with these track loaders. These rentals are according to the time span that the machinery is required. Depending on the usage and the geographical area, several rental companies give out and accordingly plan the rent amount for these heavy equipment. Renting construction vehicles saves up on time as well as finances as it is cheaper to use it and give it back after the work is completed.

Things You Should Know About the Scrapers

The earthmoving and the mining industry include different equipment, which are mainly used to move both the minerals and the earth in the large mining and earthmoving projects. Some of the equipment are also used in some other applications. The scrapers are one such equipment, which are the large motorized machines utilized for hauling, digging and leveling different materials in different types of construction jobs.

 

Operating on the huge rubber tires, the motorized heavy vehicles can quickly huge quantities of earth across the construction sites, unlike the less popular versions. Now let’s have a look at the different types of scrapers available.

 

  • Single engine wheeled: The standard motor scrapers contain bowls and the aprons to drop down the load of the materials to retain these and ejectors to push the load out. Because of the hydraulic system, the components of these scrapers can function independently.

 

    • Pull type: The pull type scrapers are capable of moving in the wet and the soft soils and the sand. Unlike the motor scrapers, the pull ones are not motorized. As a result, these are pulled by other vehicles. These vehicles can predate the self-propelled ones while the massive ones were pulled by the crawler tractors. But after that, the pull type vehicles shrank in the size and mainly become associated with the agricultural usages. These now have come into their own as a number of companies are now offering pull-type construction-grade scraper.
  • Dual engine wheeled: The scrapers are really efficient on the short hauls where the entire cut-and-fill areas have enough length to fill the hopper and are close enough. These heavy machines have two engines. One of these drives the front wheels and another one drives the rear wheels.
  • Elevating: The elevating wheel tractor scraper is basically a self-loading vehicle with the additional ability to do the fine and finish work and to mix the homogenize materials. It is equipped with a ladder-type conveyor, which is located in the bowl in order to lift the material as this enters into the bowl as well as transports this to the rear. This scraper can load itself and therefore this is really popular on the smaller jobs like as the agricultural applications or the site preparation.

 

  • Open Bowl or the conventional ones: This type of scraper is mainly available in the push loaded, self loading or the push loaded hauling system along with the board material appetite. This allows these scrapers to be used in the heavy construction, general construction, waste and mining.

 

These days, both the pull and dual engine type scrapers have become really popular. These days, quite a number of the reputable scrapers companies, which are typically involved in the agricultural market, are producing heavier and larger units for the construction uses. These companies also offer these heavy equipment for rent. So, if you need these equipment for any business purpose or for the agricultural needs, there is no requirement of investing in these. You can now take these vehicles for rent.

 

Related articles across the web

Caterpillar 963 Track Loader

Construction and mining industry are hugely dependent on different kinds of heavy equipment for completing their projects. The heavy equipment manufacturing companies also do their bit to ensure that the needs of their clients are met. At times they also build customized machines to meet certain specific demands of their clients. For instance, a client wants machine that consumes less fuel and has the potential to work all day long, the equipment manufacturing companies will pay heed to such demands and may design something that suits that specific demand.

Construction industry is quite a dynamic industry and changes are bound to happen. With the ever changing needs of the construction companies, developing machines based on new technologies is gaining popularity. No construction company wants to work with an outdated equipment. They all want to upgrade their equipment with the latest technology available in the market. Undoubtedly, they got to afford to buy such technologies. Many are in the position to embrace development and go for upgrading their machines with new technologies or give away the redundant piece and buy a new one.

Caterpillar 963 Track Loader is a perfect example of construction companies embracing new technology. There were various models of track loaders available in the market but they were not having anything special in them and hence construction companies were waiting for something that will give them a new experience. Their wait for finally over with the introduction of CAT 963 loader as it tried to fulfill many of the clients demands in every possible way.

The track loaded has been gifted with a wonderful piece of engine that has a power of 150.2 hp. This is considered to be the best in this class of loaders. It has a displacement of 7 liters and its operating weight is around 18639 kg or 42,000 lbs. It has a fuel capacity of 68.9 gallons which is around 26.1 liters. In addition to this, the hydraulic system fluid capacity is around 60 liters. The engine is considered to be one of the best among all the models produced by companies other than CAT.

If we talk about the undercarriage part of the machine, the width of the track shoe is 550 mm and the number of track rollers it has preside is 6. The length of the track is 2454 mm and the track gauge is around 1850 mm. With these specifications, it turned out to be one of the best the industry has.

For people who are particularly looking for a feature in the machine should probably go through its user manual. There they will find everything they need to know. For guys who are interested in buying the loader should possible contact CAT and check if they will be able to ship the machine to their place. Shipping the item should not be a limitation to a company as big as Caterpillar. The price of this machine can be easily known from the website of the company or one can also check with the dealer for its price.

Related articles across the web

Tips on how to run an excavator

We basically believe that working on a heavy equipment is as simple as driving a vehicle. It may have the same feature as what we see in a car but the ones who actually operate heavy equipment beg to differ. One can simply not compare working on heavy equipment with driving one’s car as the former is lot more complex in nature and the person working on the machine has to be extra careful while he is on it. He got to check a lot of things before he begins with his work and needs to be sure that all the things that he needs during his work are working just fine. In case he notices any issue, he should be reporting it to the supervisor in charge or should take things in his control and ensure that the machine is in order before he kick starts with the job.

Not all the heavy equipment are tricky to work on but there are machines like excavators that can really takes its toll on the operator. Especially if the operator has to function in an extremely rough and rigid terrain, things may become all the more strenuous for him. Only with the help of experience will one be able to manage the machine smoothly or else things may go out of his control and the consequences can be intensely severe.

We would be discussing few important tips that one should be following while they work on an excavator.

Proper usage of the joystick:-

One needs to understand that the joystick in an excavator is the brain of the machine and the way you use the joystick, the machine will flow accordingly. The joystick is used extensively to keep a control on the movement of the cabin and the bucket attached to the machine. So if you are moving the joystick correctly, the excavator will move the way you want it to. By using the one to your right, you will control the scooping that will help the boom to move in the upwards and downwards position. The joystick to the left of the driver controls the cab. So if you use the one to your left correctly, it will move the machine to the place you want it to go. It also helps in enlarging and shortening the length of the boom.

Drive rods are equally important:-

If you want to increase or decrease the speed of the excavator, you can do it with the help of the drive rods that lies between the legs of the operator. Each rod has its own exclusive purpose. It works co-related with the tread and when pushed forward or backward will move the tread of that side. If you want to drive the excavator straight then you simply have to push both the sticks at the same time in the forward direction and it will speed up and if you pull them back will drive the machine backwards.

Alongside with lot of experience in operating an excavator, following these simple tips can be really useful to operate the machine.

Related articles across the web

COMPACTION ROLLERS AND ITS USES

Compaction rollers are heavy duty engineering vehicles that are used to make soil, concrete, road making material etc compact and rolled smoothly. The compaction roller is fitted with a heavy iron cylindrical roller at the bottom which presses and compacts material coming under it.

Compaction rollers are mostly owned by construction organizations that have the duty of making roads or highways and are in need of this vehicle to flatten and make the path compact with the given materials. Compaction rollers are heavy duty vehicles that have controls set in it but require a person to operate the controls.

These vehicles are available in various sizes depending on the needs and requirements of the work to be performed. Compaction rollers are also used for agriculture. Setting a particular plot of land for farming needs heavy manual labour. To save up on energy and manpower these heavy duty vehicles are used.

They were initially introduced as horse drawn rollers that performed the task of compacting the soil but with time and advancements in technology it has evolved to be automatic machine rollers which are mechanically advanced with better efficiency.

Compaction rollers are used especially by government authorities in charge of making roads and highways. Sealing roads with concrete and tar can be well performed with these compaction rollers that cover a large distance in a short span of time. The work is done precisely and efficiently. The modern compaction rollers are manufactured in accordance to the demands of the users. The vehicles are made with perfection and are made in such a way that saves up on time and performs the work efficiently.

The main energy enforced on these rollers is vibration. Depending on the amount of vibration extracted from these rollers, the given materials are compacted. A few compaction rollers have rollers attached at the bottom of the machine and a few have wheels attached at the rear end. For various purposes these rollers are used and accordingly the results are extracted.

At several instances like crushing and compacting asphalt, there is an external spray of water on the drums to prevent the material from sticking to the cylindrical rolls. These cannot be controlled with the help of the automated switches and needs external attention.

Owning these heavy duty machines is an asset provided they are maintained and serviced well. Taking good care of the machinery provides better efficiency. It is an investment to own all possible modern machinery like compaction rollers as it accordingly helps in tasks assigned like creating roads and paths.

Several agencies who deal with rental and leasing services (Like B&R Equipment) provide these heavy duty compaction rollers on rent or lease to the users. Not all users need to access and use this machinery for their work. At certain instances when there is a need of this machinery, one can easily borrow it and save up on the extra amount to be spent to purchase an entire vehicle and not have any major use of it later.

 

Excavators And Their Usages-An Outline

The excavators are the engineering and the construction vehicles, which have a really unique look with a cab mounted on the pivot arm, a long arm and an undercarriage that includes wheels or the tracks. These machines have the customized buckets to fit with the required job as there are various types of buckets available for the usage in the construction. Often the look of these heavy vehicles can be customized perfectly with the capability of changing the buckets or the thumbs.

These heavy vehicles are generally specified or defined by the arm power, the digging depth and the dump height power rating. But these days, these excavators also come with various types of attachments like as the breakers, augers and the grapples. Besides, the buckets also come in various types, for example the rock, sorting, and the general purpose buckets.

The excavators either can be mounted on the tracks or the wheels. These are mainly used to help these heavy vehicles for the mobility and therefore these are used in various types of environments. The track hoes are one kind of excavators, which are basically mounted on the tracks.

 

Now let’s have a look at the different roles played by these excavators.

 

These heavy vehicles are mainly used for different types of roles like as the purpose of digging the holes, foundations or trenches. Besides, these are also used for some other purposes like lifting and placing the heavy materials like the pipes, demolishing, river dredging, mining and landscaping. These are also used for the purpose of brush cutting aided with the hydraulic attachments. The multipurpose roles of these excavators allow these to be used in different types of locations. Other important roles played by these heavy vehicles are handling different types of materials effectively.

The excavators come in various sizes and types on the basis of the different types of jobs these play. The small excavators are generally called compact or mini excavators and these mainly come equipped with the bulldozer blades at their front part. These are capable of fitting through the doorways. On the contrary, the large ones are capable of weighing around 180000 lbs.

The compact excavators are mainly found in two different types known as the zero tail swing and the tail swing models. Usually, all the compact models used to come with the tail swing models and these also had a rear counterweight attached to these in order to prevent the chances of tipping during the digging process. But the counterweights make these really hard to maneuver these vehicles as these extend beyond the tracks. On the other hand, the zero tail swing machines have counter weights, which don’t extend over the rails and therefore these make it really easy for the operators to maneuver the jobs.

These days, it is also possible to take these heavy vehicles for rent from the renters as per your business requirements. This way you can get all the facilities that these excavators offer without the requirement of paying too high.

Related articles across the web

A Brief Guide On The Articulated Trucks

For every business, the main goal is to move the materials at the lowest possible rate. So, whether you are planning to add to the hauling fleet or if you are thinking of renting any dependable machine for the purpose of any particular job, the articulated trucks are mainly designed to offer the speed, fuel efficiency and the required power, which can match with your business operation in the best possible manner.

 

The articulated trucks have the hinge between the cab and the dump box, but these are completely different from the semi trailer trucks as the cabs are the permanent fixtures and not separable vehicles. Besides, the steering of these trucks is accomplished through the hydraulic rams that can pivot the total cab, instead of the pinion and the rack steering on the front axle. Therefore, these vehicles are highly adapted to the rough terrain.

 

The main feature of these articulated trucks, which put these in the separate driving class, is the drive system of these trucks. The drive system of these trucks is generally based on the total number of the wheels on the axles, which are used to pull these trucks. The most usual system is known as the 6 x 6 system, where the articulated trucks have six wheels on three axles and all the wheels are used while the trucks are driven.

 

Another system used in the articulated trucks is the 6 x 4 drives, where the rear four wheels are mainly used while driving. The original driving system in the articulated trucks is the 4 x 4 drive. This type of driving was mainly designed for those trucks, which mainly drive over the roughest terrain available on the planet. This system also helps the trucks maneuver over terrain, which can be a possible issue for the goods, which are being carried.

 

The articulated trucks are mainly used to carry different types of heavy materials. For example, the 4 x 4 drives are mostly used for the loads like the flammable liquid. These trucks also have the capability to carry the loads of around 40 tons in weight. This is why these types of articulated trucks are really popular in the construction industry, where the heavier materials are mainly used.

 

As a whole, the articulated trucks are considered to be the most adaptable hauling vehicles available in the world. Due to the mobility as well as the versatility, these are widely used in various industries and not only in the construction industries. For example, these trucks are used by the logging companies that can transport a huge amount of trees from one place to another. Besides, in a number of cases, the military people also use these trucks widely.

 

So, if you require these heavy vehicles for your business requirements or for any construction purpose, then you can now even take these for rent. These days, there are a number of heavy vehicle manufacturer companies available, from where you can take these articulated trucks for rent within affordable rates.

 

 

An Overview Of The Effectiveness Of The Dozers

The dozers, commonly known as the bulldozers are known for the versatile tracks and the immense blades and these are comprised of a number of engine, structural and hydraulic assemblies. The core bodies of the dozers contain the mainframe and the undercarriage and these are mainly fabricated from the giant castings and the structural and low carbon steel plates. A wide and heavy blade is mounted in front of the tractor and it is mainly used to push any kind of densely compacted materials.

 

A dozer mainly contains three parts, the tracks, the blade and the ripper. The blade is the heavy metal plate fixed in front of these vehicles by push frames. The blades are mainly used to scoop up large amount of materials and push different objects like earth or sand. Another part is an “S” like blade, which is short and doesn’t include any side wings or lateral curves. Besides, there is a “U” like blade that includes pronounced, very curved and tall side wings, which can gather more amounts of materials.

 

The majority of the dozers also contain a claw like tools, which is mounted on the rear part of the dozer. In the past, these were only used by the farmers for the purpose of landscaping and plowing. But the scenario has changed and now these are widely used even in the industrial sectors like in the mines and different types of engineering projects mainly because of the rear ripper claw.

 

There are different types of dozers available and these mainly differ on the basis of the usage. The crawler dozers mainly look like tractors and these are widely used for pushing the sand and other types of heavy materials from one place to another. The crawlers are basically the tracked vehicles and therefore these don’t have any tires. The large crawlers come with the rippers installed in the rear parts of the equipment and therefore these can crash any kind of hard surfaces. This type of dozer is widely used in the irregular fields because of the abrasive plate. The big plates located in the front part of these dozers are used to move the sands and the heavy materials.

 

On the other hand, the wheel dozers are quite bigger in size than the crawlers. Because of the high performance as well as the high efficiency, these dozers are widely used in different types of construction plans like the water parks and the stadiums. These dozers have heavy and large tires that enable these to function perfectly.

 

The main difference between both of these heavy vehicles is that in case of wheeled dozer, one can move the wheels on a small axis, but this is not possible in case of the crawler dozer. Besides, wheeled dozers include completely articulated hydraulic steering, which is really flexible and easy to operate.

 

So, you must have learnt the effectiveness of these dozers for your business. But there is no requirement of purchasing these all the time as these are pretty costly. These days, there are a number of companies available from where you can take these for rent.

 

Related articles across the web